Fuji Xerox DocuPrint CP215 Series User Manual page 230

Checking the Printer Status with E-mail
This section describes cautions for sending e-mail to the printer to check the printer status.
• You can specify any title for the e-mail when checking the printer status or changing the printer
settings.
• Use the commands described in the next section to create the text of the e-mail.
• Commands That Can Be Used in E-mail Text
Use each command according to the following rules:
• Prefix all commands with "#", and specify the #Password command at the top of the e-mail.
• Command lines without "#" are ignored.
• Write one command on each line and separate each command and parameter with a space or a
tab.
When the same command is written two or more times in one e-mail message, the second and
subsequent commands are ignored.
Command
#Password
#NetworkInfo
#Status
• Example of Commands
• When the read only password is "ronly", and to check the printer status:
#Password ronly
#Status
#NetworkInfo
230 Maintenance
Parameter
Password
Description
Use this command at the top of the e-mail when a
password is set. You can omit this command when the
password is not set.
Set this when you want to check information on the
network settings list.
Set this when you want to check the printer status.