Auto Adjust Regi; Adjust Colorregi - Fuji Xerox DocuPrint CP305 d User Manual

Labels
LW Gloss Card
HW Gloss Card

• Auto Adjust Regi

Purpose:
To specify whether to automatically perform color registration adjustment.
Values:
Off
*
On

• Adjust ColorRegi

Purpose:
To manually perform color registration adjustment.
Manual Color Registration Adjustments are required when the printer is initially installed and after the
printer is moved.
NOTE:
• The Adjust ColorRegi feature can be configured when Auto Adjust Regi is set to Off.
Values:
Auto Adjust
ColorRegi Chart
Enter Number
NOTE:
• Ensure that you remove the paper from the single sheet feeder (SSF) before performing Auto Adjust.
165 Using the Operator Panel Menus
*
0
-6 to +6
*
0
-6 to +6
*
0
-6 to +6
Does not
Automatically performs color registration adjustment
Automatically performs color registration correction.
Prints a color registration chart. The color registration chart prints a
lattice pattern of yellow, magenta, and cyan lines. On the chart, find
the values on the right side that are next to the line that is perfectly
straight for each of the three colors. If the value for this line is 0,
color registration adjustment is not required. If the value for this
line is any value other than 0, specify the adjustment values for
lateral adjustment and process adjustment under Enter Number.
LY -9 to +9 Sets lateral (perpendicular to paper feed direction) and process
(paper feed direction) color adjustment values individually for
LM
Yellow, Magenta, and Cyan. Enter a number in order of lateral
LC
adjustment (left), lateral adjustment (right), and process
adjustment. Press the
RY -9 to +9
RM
RC
PY -9 to +9
PM
PC
automatically perform color registration adjustment
button to save all the settings.
.
.