BBQ GPF2414AE Instruction Manual page 9

Step 3
a) Loosen the two pre-installed bolts on the
top of right front leg and left front
leg .Then allow 1/4 bolt's length to extend
from the left and right front leg.
b) Align the large holes on the bottom of
front support (I) with the bolts extended
from the left and right front leg.
c) Slide the front support until it locks into
place. Tighten bolts by hand until secure.
d) Repeat the procedure for the back
support (AB).
e) Go back and tighten all bolts using the
screwdriver provided.
Step 4
a) Align the holes on the left side of left
side beam (J) with the holes on the
left side of front support and left front
leg.
b) Insert one bolt (AA) into each
pre-drilled hole.Repeat the procedure
for the right side of left side beam .
c) Tighten all bolts using the
screwdriver provided.
d) Repeat the procedure for the right
side beam (W).
e) Go back and tighten all bolts using
the screwdriver provided.
AA M6×16 bolt
GPF2414AE
Instruction Manual
8 PCS
8