Table of Contents
Advertisement
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is
fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if
necessary.
Estimated Assembly Time: 30 minutes.
Step 1
Align the holes on the back bottom
a)
beam (K) with the holes on the left
back leg (Z) and right back leg (U).
Insert one bolt (AA) into each
b)
pre-drilled hole. Tighten bolts by hand
until secure.
Loosen the four pre-installed bolts on
c)
the right front leg (S) and left front leg
(Q) .Then allow 1/4 bolt's length to
extend from the left and right front leg.
d)
Align the large holes on the front panel
(R) with the bolts extended from the
left and right front leg.
e)
Slide the front panel until it locks into
place. Tighten bolts by hand until
secure.
f)
Go back and tighten all bolts using the
screwdriver provided.
AA
M6×16 bolt
Step 2
a) Align the holes on the left bottom beam
(P) with the holes on the left back leg
(Z) and left front leg (Q).
b) Insert one bolt (AA) into each
pre-drilled hole.
c)
Repeat the procedure for right bottom
beam (T).
d) Tighten all bolts using the screwdriver
provided.
AA
M6×16 bolt
GPF2414AE
Instruction Manual
Assembly Instructions
2 PCS
8 PCS
7
Advertisement
Table of Contents
