BBQ GPF2414AE Instruction Manual page 10

Step 5
a) Align the hole on right end of the
bracket (V) with the hole in the
center of the right bottom beam.
b) Insert one bolt (AA) into each
pre-drilled hole.
c) Repeat the procedure for the left
side of the bracket and the left
bottom beam.
d) Tighten all bolts using the
screwdriver provided.
AA M6×16 bolt
Step 6
a) Insert the wheel axle (L) into the hole
in the right cart.
b) Put one collar (EE) on each end of the
axle.
c) Put one wheel (M) on each end of the
axle.NOTE: the protruding side of
each wheel must face the cart.
d) Screwing one nut (BB) on each end of
the axle using the wrench provided.
e) Cover the cap (N) on the nut.
BB M10 nut 2 PCS
EE collar 2 PCS
GPF2414AE
Instruction Manual
2 PCS
9