BBQ GPF2414AE Instruction Manual page 12

Step 9
a) Open lid.
b) Align the holes on the heat insulator
(GG) with the holes on the lid (G).
c) Insert the pre-inserted bolts on the lid
handle (H) into the holes on the lid and
heat insulator. Then seal with one flat
washer (II),one spring washer (JJ) and
one nut (FF).
d) Tighten all nuts using the wrench
provided.
e) Put the body assembly on the cart
assembly.
GG heat insulator
II M6 flat washer
JJ M6 spring washer
FF M6 nut
Step 10
a) Align the holes on the body assembly
with the holes on the body side
support.
b) Insert one bolt (AA) into each
pre-drilled hole. Tighten bolts by hand
until secure.
c) Go back and tighten all bolts using the
screwdriver provided.
AA M6×16 bolt
GPF2414AE
Instruction Manual
4 PCS
2 PCS
2 PCS
2 PCS
4 PCS
11