BBQ GSF3016A Owner's Manual

4-burner lp gas grill

Advertisement

Quick Links

WARNING
Improper installation,
adjustment, alteration, service or
maintenance can cause injury or
property damage.
Read the installation,
operation and maintenance
instructions thoroughly before
installing or servicing this
equipment.
DANGER
Failure to follow these
instructions could result in fire
or explosion that could cause
property damage, personal
injury or death.
DANGER
DO NOT use gas grill for indoor
cooking or heating. TOXIC
fumes can accumulate and
cause asphyxiation. DO NOT
use in or on boats or
recreational vehicles.
PROPOSITION 65 WARNING
Chemicals known to the State of
California to cause cancer, birth
defects or other reproductive
harm are created by the
combustion of propan
WARNING
FOR YOUR SAFETY :
For Outdoor Use Only
(outside any enclosure)
GSF3016A
Owner's Manual
4-Burner LP Gas Grill
e.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. IF YOU ARE ASSEMBLING THIS
UNIT FOR SOMEONE ELSE, GIVE THIS
MANUAL TO HIM OR HER TO SAVE FOR
FUTURE REFERENCE.
FOR CUSTOMER SERVICE, EMAIL TO
SERVICE@BBQTEK.COM OR
CALL 1-877-885-8225 (TOLL-FREE),
7:00 A.M. – 4:00 P.M.(PST), MONDAY-FRIDAY.
0
Model# GSF3016A

Advertisement

Table of Contents
loading

Summary of Contents for BBQ GSF3016A

  • Page 1 Model# GSF3016A 4-Burner LP Gas Grill WARNING Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this equipment. DANGER Failure to follow these instructions could result in fire...
  • Page 2: Grill Operation

    Always read and understand the WARNINGS and INSTRUCTIONS that are contained in this manual before attempting to use this gas barbecue grill to prevent possible bodily injury or property damage. Always keep this manual for convenient future reference. GSF3016A Owner’s Manual...
  • Page 3: Table Of Contents

    Illustrated Parts List ..................5 Hardware List....................6 Assembly Instructions..................7 Operating Your Grill..................13 Connecting Gas Cylinder.................13 Checking for Leaks..................14 Lighting Your Grill....................14 Excess flow safety valve reset procedure............16 Rotisserie Operating Instruction..............17 Care and Maintenance..................18 Award-Winning Barbecue Recipes..............20 Troubleshooting....................21 Warranty Program.....................23 GSF3016A Owner’s Manual...
  • Page 4: For Your Safety

    4. Move gas hoses as far away as possible from hot surfaces and dripping hot grease. 5. Never keep a filled gas container in a hot car or car trunk. Heat will cause the gas pressure to increase, which could open the relief valve and allow gas to escape. GSF3016A Owner’s Manual...
  • Page 5 Step 3. Ensure that the valve nozzle is pointing straight and completely inserted into the venturi tube. GENERAL INFORMATION 1. A propane gas cylinder is required for operation. 2. This gas grill is NOT intended for commercial use. GSF3016A Owner’s Manual...
  • Page 6: Illustrated Parts List

    V V. G rease c up......1 pc X X . S ide knob s eat....1 pc WW. S ide burner k nob...1 pc A A . A S pare tank stopper ..1 ZZ. S pare tank stopper..1 pc Y Y. Tank Clip..1 pc GSF3016A Owner’s Manual...
  • Page 7: Hardware List

    K: 1 PC L: 2 PCS ¢20 collar Screwdriver Wrench Hardware listed above is scaled to actual size. This does not apply to the screwdriver and wrench. (A Screwdriver is required on assembly and is included for your convenience). GSF3016A Owner’s Manual...
  • Page 8: Assembly Instructions

    (DD) & (CC). Push down on the lower cart back beam (FF) until it locks into place, then tighten all the bolts using screwdriver provided.Repeat the procedure for the upper cart back beam (GG). Pre installed Bolt x4 GSF3016A Owner’s Manual...
  • Page 9 (JJ) on each end of the axle. Screw one lock nut (I) on each end of the axle using the wrench (L) provided. c) Insert one wheel cap (KK) on each wheel. J X2 GSF3016A Owner’s Manual...
  • Page 10 Insert one bolt (A), one spring washer (C) and one flat washer (D) into each hole. T ighten by hand until secure. d) Go back and tighten all bolts using the screwdriver provided. GSF3016A Owner’s Manual...
  • Page 11 (B), one spring washer (C) and one flat washer (D) into each hole. T ighten by hand until secure. b) Repeat the procedure for the left side of the body assembly. Go back tighten all bolts using the screwdriver provided. GSF3016A Owner’s Manual...
  • Page 12 Insert and screw the stopper (H) into the hole on the upper cart back beam. CAUTION: Don’t take away the stopper (H) from the back beam, otherwise that could result in fire or explosion that could cause property damage, personal injury or death. GSF3016A Owner’s Manual...
  • Page 13 (YY). b) Connect the tank with regulator by screwing the collar onto the tank valve. (See diagram to left). Make certain all connections are connected securely. Fully Assembled View Left Side Right Side GSF3016A Owner’s Manual...
  • Page 14: Operating Your Grill

    8. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane. GSF3016A Owner’s Manual...
  • Page 15: Checking For Leaks

    Press the valve knob and rotate it counterclockwise to the ‘’HIGH’’ position. The burner should light immediately. If more than one burner is desired, repeat the same procedure for the adjacent burner and continue in sequence until all desired burners are lit. Adjust burners to the desired cooking temperature. GSF3016A Owner’s Manual...
  • Page 16 FIG. B FIG. C Normal: Soft blue flames with yellow tips Out of adjustment: Noisy hard blue Poor combustion: Wavy, yellow between I inch - 2 inches high. flames – too much air. flames- too little air. GSF3016A Owner’s Manual...
  • Page 17: Excess Flow Safety Valve Reset Procedure

    13. When all front burners are lit, close the grill lid. 14. Wait for 10-15 minutes; the temperature should reach 400 – 450°F WARNING: The cylinder valve always has to be above the horizontal position for the cylinder to have vapor withdrawl only. GSF3016A Owner’s Manual...
  • Page 18: Rotisserie Operating Instruction

    22. Always follow all safety procedures as stated in your rotisserie and grill manual. 23. To avoid injury let the grill cool down before removing the drip pan. SAVE THESE INSTRUCTIONS Operation Instructions for rotisserie use on a grill equipped with rotisserie burners*: GSF3016A Owner’s Manual...
  • Page 19: Care And Maintenance

    Burning off the grill after every use (approx. 15 minutes) will keep excessive food residue from building up. Recommended cleaning materials - Mild dishwashing liquid detergent Hot water Nylon cleaning pad Wire brush Paper clip Putty knife/scraper Compressed air DO NOT use cleaners that contain acid, mineral spirits or xylene. GSF3016A Owner’s Manual...
  • Page 20 Inspect burner for damage (cracks or holes). If damage is found, replace with a new burner. Reinstall burner. Make certain the gas valve orifices are correctly positioned, pointing straight into burner inlet (venturi tube). Also, check position of spark electrode. GSF3016A Owner’s Manual...
  • Page 21: Award-Winning Barbecue Recipes

    Combine all ingredients and marinate steak for 7-8 Cooking times will vary according to the vegetables hours. Remove meat from marinade and grill over chosen. very high heat to desired doneness. Heat leftover marinade to a boil and pour over grilled steak to serve. GSF3016A Owner’s Manual...
  • Page 22: Troubleshooting

    Burn grill for 15 minutes with the lid closed. manufacturing oils. Clean venturi. Spider webs or insect nest in venturi. Clean burner. Food residue, grease or seasoning salt on burner. Assure burner venturi is properly engaged Poor alignment of valve to burner with valve. venturi. GSF3016A Owner’s Manual...
  • Page 23 If flames are blue and noisy – close flap at the end of the venturi tubes in 1/8” increments until flames are correct. *Propane Models must be open a 1/8 in. minimum of *Natural Gas Models must be open a 1/16 in. minimum of GSF3016A Owner’s Manual...
  • Page 24: Warranty Program

    If you have any questions related to the product or warranty, please email us at service@bbqtek.com or call our customer service center at 1-877-885-8225, 7:00 A.M. to 4:00 P.M. (PST), Monday through Friday.

Table of Contents