Tutorial Guide; T1: Creating A One-Line Legend, Component Marker - Brady TLS2200 User Manual

Tutorial Guide

The following pages provide step-by-step instructions for creating and printing labels using a
variety of different printer functions.
The part number of the marker roll used is noted at the beginning of each tutorial. Many of the
tutorials use part number PTL-19-423. A sample roll of this 1" x 1" marker is provided in your
™
TLS2200 Thermal Labeling System package.

T1: Creating a One-Line Legend, Component Marker

Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Label to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Check the Status Bar to make sure the unit is in Component mode. If not, press <Shift>
1.
+ <Wire> to toggle from Wiremarker mode to Component mode.
Enter 100A on line one (font is set at default size – 9).
2.
Press <Print>.
3.
38
Center
Center
0 Degrees
Component
100A
™
TLS2200 Thermal Transfer Printer User Manual