T6: Creating A Barcode Label - Brady TLS2200 User Manual

T6: Creating a Barcode Label

Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Label to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Legend Type
Press the <Barcode> key to toggle the legend type from Text to Barcode mode
1.
(B is displayed on the Status Bar).
Press the <Func> + <Setup> keys to access the Setup Menu.
2.
Press the <
3.
With the cursor highlighted on Bar Height, press <Enter>.
4.
Use the <
5.
Press the <
6.
Press the <
7.
press <Enter>.
If human readable, press the <
8.
press <Enter>.
Press the <
9.
10. Toggle <
▼
11. Press the <Delete> key to back out one level in the Setup Menu tree.
12. Press the <
13. With the cursor highlighted on Rotation, press <Enter>.
14. Use the <
15. Press <Func> + <Exit> to exit back to the Text Editor screen.
16. Enter barcode text as needed and print your label.
™
TLS2200 Thermal Transfer Printer User Manual
Center
Center
0 Degrees
Component
Text
> key once to select Barcode, then press <Enter>.
▼
> and < > keys to set the height of your barcode(s), then press <Enter>.
▲ ▼
> key once to select Human Readable, then press <Enter>.
▼
> or < > keys to toggle the human readable text on or off as required, then
▲ ▼
> key once to select Barcode type, then press < Enter>.
▼
> and < > key to select Barcode type, then press < Enter>.
▼
> key twice to select Style, then press <Enter>.
▼
> and < > keys to select the desired rotation, then press <Enter>.
▲ ▼
BRADY
A101
A101
> or < > keys to select the text font size desired, then
▲ ▼
43