Connecting the TLS2200
Complete the following steps to connect the TLS2200
1.
Locate the communication port on the bottom of your TLS2200 printer. This is the
port that looks similar to a modular phone jack.
2.
Plug the communications cable into the communication port and set the TLS2200
printer next to your PC.
3.
Locate an unused serial port on the back of your PC. This port looks similar to the
diagram below.
Note: If you have a 25-pin serial port instead of a 9-pin port, you should purchase an
adapter from a computer parts supplier.
4.
Plug the free end of the communications cable into the serial port and tighten the screws.
You have completed attaching the TLS2200
begin installing the software.
™
TLS2200 Printer Connected to PC
™
TLS2200
Thermal Transfer Printer User Manual
™
Printer to a PC
Serial Port
™
printer to a PC:
On/Off Switch
Battery Pack
Communication Port
™
printer to your PC and are now ready to
™
™
71