T4: Creating Serialized Wiremarkers - Brady TLS2200 User Manual

T4: Creating Serialized Wiremarkers

Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Labels to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Press <Legend Clear> to clear the text from line one.
1.
2. Check the Status Bar to make sure the unit is in Wiremarker mode. If not, press
<Shift> + <Wire> to toggle from Component mode to Wiremarker mode.
Enter A201 on line one.
3.
Press <
◄
4.
Press <Func> + <Serial>.
5.
When "No. to Serial?" prompt appears, enter 5, then press <Enter>.
6.
When "No. of Copies?" prompt appears, enter 2.
7.
Press <Enter> or <Print>. The printer begins printing two each of the five
8.
wiremarkers listed above.
™
TLS2200 Thermal Transfer Printer User Manual
Center
Center
0 Degrees
Wire
> to position the cursor under the last character.
A201
A201
A201
A201
.
.
.
.
A205
A205
A205
A205
41