Appending A List - Brady TLS2200 User Manual

The Text Editor screen appears. The left and right arrows on the Status Bar (top line of the
screen — see below) are replaced by lightning bolts to indicate that the Edit mode is on.
Text Editor screen with
Edit mode on.
When in Edit mode, the Print, Feed, and Peel commands are disabled. Turn the Edit mode off
to restore these functions.
The Edit mode toggles to Off when the printer is turned off.

Appending a List

To append a list means to add legends to a previously saved list. All legends are appended to
the end of the list. You cannot save legends to the beginning or middle of a list.
1. If you do not have a list active, select a list. Refer to Selecting a List earlier in this section
for instructions.
2. Create a legend following the normal guidelines for non-list legends.
Press <Func> + <Save>.
3.
4. When the prompt appears "Save as New" or "Save as Current", select "Save as New".
Your legend is now added to the end of the list.
Deleting a List
To delete a list from memory, follow the instructions below:
Press <List> to activate the List Menu.
1.
Press the <
2.
prompted with all list names stored in the printer (up to 10).
Use the <
3.
<Enter>. After deleting a list, the display returns to the Text Editor screen.
32
> key four times to select Delete, then press <Enter>. You will be
▼
> and < > keys to select the name of the list you want to delete, then press
▲ ▼
01 14 CT
™
TLS2200 Thermal Transfer Printer User Manual
01