T2: Creating a Component Label Utilizing Multiple Font Sizes
Note: This example assumes you have marker roll PTL-19-423 loaded in your printer.
Label to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Press <Legend Clear> to clear the text from line one.
1.
With the font size set at the default of 9, enter MULTIPLE on line one, then press
2.
<Enter>.
Press <Shift> + <
3.
Enter FONT on line two, then press <Enter>.
4.
Press <Shift> + <
5.
Enter SIZES on line three.
6.
Press <Print>.
7.
™
TLS2200
Thermal Transfer Printer User Manual
Center
Center
0 Degrees
Component
> three times to increase the font size to 12.
▲
> eight times to decrease the font size from 12 to 4.
▼
MULTIPLE
FONT
SIZES
39