Decorative Fronts - Heat & Glo XLR-N-AU Owner's Manual

D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certifi ed for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
TONIC DECORATIVE FRONT
(TN-SLR-**)
Figure 13.15 Tonic Decorative Front
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.16 Martini Decorative Front
The tinted glass on the Martini Decorative Front meets the
tempered glass specifi cations in Section 1.B of this installa-
tion manual.
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. C • 3/10
TONIC FRONT
A
B
Figure 13.17. Dimensions of Tonic Decorative Front.
Table 1. Dimensions of Tonic Decorative Front.
A Top of decorative front to bottom of appliance.
B Bottom of decorative front to bottom of appliance.
C Inside dimension of decorative front (width).
D Outside dimension of decorative front (width).
E Inside dimension decorative front (height).
F Outside dimension of decorative front (height).
E F
C
D
670 mm
175 mm
991 mm
1.13 m
327 mm
495 mm
51