Windows Vista/7/Server 2008/Server 2008 R2 - Konica Minolta bizhub C652 User Manual

3
3.2.2

Windows Vista/7/Server 2008/Server 2008 R2

In Windows Vista/7/Server 2008/Server 2008 R2, you can install the printer driver by searching for the printer
on the network.
Reference
- Installing the driver to Windows Vista/7/Server 2008/Server 2008 R2-based computers requires the
administrator authority.
d
Reference
Since the printer is searched for during the installation, be sure to connect this machine to the network before
turning it on. For details on the network settings, refer to "User's Guide [Network Administrator]".
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Click the [Start] button, and then select "Control Panel".
3
Select the printer functions from [Hardware and Sound].
% In Windows Vista/Server 2008, click [Printers] under "Hardware and Sound". When "Control Panel"
is displayed in Classic View, double-click [Printers].
% In Windows 7/Server 2008 R2, click [View devices and printers] under "Hardware and Sound". When
"Control Panel" is displayed in an icon view, double-click [Devices and Printers].
4
Click "Add a printer" on the toolbar.
"Add Printer Wizard" appears.
5
Click "Add a local printer".
The page for choosing a printer port appears.
6
Click "Create a new port", and then select "Standard TCP/IP Port" as the type of port.
7
Click the [Next] button.
8
Select "TCP/IP Device", and then enter the IP address.
% If both LPR and Port 9100 are enabled on this machine, the printer driver is connected to this
machine using LPR.
9
Click the [Next] button.
% If the [Additional Port Information Required] or [Information for Additional Port Required] dialog box
appears, go to Step 10.
% If the "Install the printer driver" dialog box appears, go to Step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] button.
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
12
Click the [Next] button.
The "Install the printer driver" page appears.
13
Click the [Have Disk] button.
14
Click the [Browse] button.
15
Select a desired fax driver folder on the DVD-ROM, and then click the [Open] button.
% Select a folder according to the printer driver, operating system, and language to be used.
3-6
Installation using Add Printer Wizard
bizhub C652/C652DS/C552/C452 (Version 2)
3.2