Table of Contents
Advertisement
Using the Progressive Car Finder Feature
Press the
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter's
option is installed). To stop the alarm, press and hold the
again for 3 seconds. The system will automatically stop after 30 seconds.
Programmed Transmitter Notification
As a security precaution each time the vehicle's ignition is turn on the status LED
light with flash the number of transmitters programmed into the system. This helps
to identify unauthorized transmitters from accessing your vehicle. If you believe an
unauthorized transmitter has been programmed to your system, contact your installing
dealer for assistance.
Valet Mode
When valet mode is activated the status LED will light solid, and all security and
remote start functions will be disabled. To enter or exit valet mode simply follow the
steps outlined below:
1.
Turn the vehicle's ignition ON.
2.
Push and hold the programming/valet button.
3.
The LED will turn on solid when valet mode is active
4.
Release the programming/valet button.
User Selectable Notification Chirps
System ARM/DISARM chirps can be toggled ON or OFF without entering the
programming feature banks.
1.
Turn the ignition ON then OFF.
2.
Press and release the valet/programming button 3 times. The system
will respond with 1 chirp for ON or 2 chirps for OFF.
2020 Voxx Electronics Corporation. All rights reserved.
button to locate your vehicle. The system will flash the parking lights
button for 3 seconds to activate the personal protection alarm.
and
buttons can be used to lock and unlock the door (if the
button on the transmitter
5
Advertisement
Table of Contents
