Brother P-touch QL-1050 Service Manual page 98

2. The "Fan check" window appears.
3. Click the "Fan ON" button so that the fan provided in the back of the machine is
turned around.
4. Confirm the fan turning and click the "Fan OFF" button. Then, the fan is stopped.
5. If the fan is stopped normally, "OK" appears in the central message column, and
the "OK" button is enabled.
* If the fan does not work normally, "Fan Error." appears in the message column.
6. Click the "OK" button to close the window.
Fig. 13
Fig. 14
12