6 ] Removing The Cutter Unit Assy And Mecha Assy - Brother P-touch QL-1050 Service Manual

[ 6 ] Removing the Cutter Unit ASSY and Mecha ASSY

(1) Take out the harness from the hole of the under cover.
(2) Remove the two screws and remove the cutter unit ASSY from the mecha ASSY.
Screws
Fig. 3.1-23 Removing the Cutter Unit ASSY and Mecha ASSY (1)
(3) Pull the harnesses out of the under cover. Remove the two screws and remove the
mecha ASSY from the under cover while pulling both sides of the under cover outwards.
Mecha ASSY
Under cover
Fig. 3.1-24 Removing the Cutter Unit ASSY and Mecha ASSY (2)
Mecha ASSY
III- 18
Harness
Cutter unit ASSY
Screws
Hole
Harness
Under cover