2 ] Installing The Panel Cover - Brother P-touch QL-1050 Service Manual

[ 2 ] Installing the Panel Cover

(1) Assemble the LED guide onto the panel cover with the one screw.
(2) Assemble the power button and feed button onto the panel cover.
Screw
LED guide
(3) Assemble the SB PCB ASSY and cover sensor arm R onto the panel cover and secure
the SB PCB ASSY onto the panel cover with the two screws.
Note: Make sure to put the harness of the SB PCB ASSY through the hook of the panel
cover.
Screw
Panel cover
Power button
Panel cover
Fig. 3.2-11 Installing the Panel Cover (1)
Cover sensor arm R
SB PCB ASSY
Fig. 3.2-12 Installing the Panel Cover (2)
III- 33
Feed button
Screw
Hook
SB PCB ASSY
Panel cover