4 ] Installing The Front Side Cover, Panel Cover And - Brother P-touch QL-1050 Service Manual

[ 4 ] Installing the Front Side Cover, Panel Cover and Front Cover
(1) Align the pins of the panel cover and front side cover with the holes on the cutter unit
ASSY, then assemble each of them with the one screw.
Front side cover
Hook
Screw
Fig. 3.2-19 Installing the Front Side Cover, Panel Cover and Front Cover (1)
(2) Put the harness through the hole of the under cover.
Mecha ASSY
Fig. 3.2-20 Installing the Front Side Cover, Panel Cover and Front Cover (2)
Pins
Screw
Hook
Under cover
III- 37
Cutter unit ASSY
Panel cover
SB PCB harness
Hole
Rib
Pass the harness under
the release lever R.
SB PCB
Panel cover
Under cover