Brother P-touch QL-1050 Service Manual page 56

(9) Assemble the double gears A, B and C with the retaining ring E2.5 and retaining ring E4.
Note 1: Confirm that the hook of the double gear C is securely hooked on.
Chassis R sub ASSY
Double gear B
Retaining ring E4
Double gear C
Retaining ring E2.5
Double gear A
Reassembling the Mecha ASSY (8)
Fig. 3.2-8
(10) Assemble the two platen supports.
Platen support
Platen support
Chassis L sub ASSY
Chassis R sub ASSY
Fig. 3.2-9 Reassembling the Mecha ASSY (9)
III- 31