Brother P-touch QL-1050 Service Manual page 95

2. Press the cover sensor arms R and L.
3. Check that the last word of the message in the "Results" column is switched into
"on" or "off".
4. Press the media sensor.
5. Check that the last word of the message in the "Results" column is switched into
"on" or "off".
6. Check all of other media sensors.
Cover sensor arm L
(Cover sensor 1)
Cover sensor arm R
(Cover sensor 0)
Fig. 10
9
Media sensor ASSY
(Media sensor 0~5)
Media sensor ASSY