Brother P-touch QL-1050 Service Manual page 90

(5) "General Settings"
Set various items before the inspection.
(5-1)
(5-1) "RS test port"
Select the serial port to be used in the RS test.
(5-2) "Print pattern"
Specify a file for each print pattern.
- Setting of print pattern files
In accordance with the table below, specify a file for each print pattern of the "Print
pattern" section in the "General settings" window.
" Adjustment print test (continuous) "
" Adjustment print test (62mm 2Labels) "
" Adjustment print test (62mm 1Labels) "
Note: Since the values of other items than the above are fixed, you cannot set them.
(5-3) Click the "OK" button after completing all settings.
(5-2)
Fig. 4
Items to be examined
4
(5-3)
File name (PRN file)
P102_ latest date.prn
P62100_Non_ latest date.prn
P62100_ latest date.prn