Brother P-touch QL-1050 Service Manual page 61

(5) Assemble the cutter unit ASSY with the two screws while paying attention to the harnesses
inside.
Screws
Fig. 3.2-17 Installing the Mecha ASSY and Cutter unit ASSY (5)
(6) Put each of the harnesses of the cutter unit ASSY through the holes on the under cover.
Rib
Cutter unit harness
Pass the harness
under the release
lever L.
Fig. 3.2-18 Installing the Mecha ASSY and Cutter unit ASSY (6)
Hook
Rib
Cutter unit ASSY
Under cover
III- 36
Mecha ASSY
Cutter unit ASSY
Hole
Under cover
Rib
Pass the harness
under the release
lever R.
Cutter home position
sensor harness