Brother P-touch QL-1050 Service Manual page 42

(4) Pull the harness out of the hole of the under cover. Remove the one screw and remove
the panel cover.
Panel cover
Screw
Fig. 3.1-21 Removing the Front Cover, Panel Cover and Front Side Cover (3)
(5) Remove the one screw and release the hook to remove the front side cover.
Front side cover
Hook
Screw
Fig. 3.1-22 Removing the Front Cover, Panel Cover and Front Side Cover (4)
Hook
Hook
Hook
III- 17
Cutter unit ASSY
Panel cover
Cutter unit ASSY
Front side cover
Harness
Hole
Under cover
Under cover