System Trouble Displays - Bosch D1260 Owner's Manual

System Trouble Displays

If you see any of the system trouble displays shown below, contact your security company to determine whether repairs
are needed.
Note: The Silence> soft key is only displayed if a trouble tone is present. Press the Silence> soft key to silence the
following trouble conditions.
Call for Service
Call your security company. Your security system may have failed.
(Your Security Co. will be replaced with the name of your security
company.)
Service Panel
Indicates a problem with the panel. The panel is not operating. Call
your security company for service.
(Your Security Co. will be replaced with the name of your security
company.)
Service Parameter
Indicates a problem with the panel. Your panel may not be
operating properly. Call your security company for service.
(Your Alarm Company will be replaced with the name of your
security company.)
Service Low Battery
Indicates the security system's battery is low, or temporarily
draining faster than the system can charge it. If this display remains
or appears frequently, call your security company for service.
Service AC Fail
Indicates that AC power to the security system is interrupted. Check
the plug-in transformer and circuit breaker. Entering COMMAND
4 silences the trouble buzz. The display clears when AC power
returns.
Service Missing Battery
Indicates the security system's battery is disconnected or shorted.
Service Communication Fail
Your security system makes repeated attempts to communicate with
the security company.
In the event your security system fails to communicate, the command center buzzes and displays
Comm Fail Route Grp1 (Route Group number can be from 1 to 4)
Notify your security company of the communication trouble.
© 2003 Bosch Security Systems
D1260 Owner's Manual
Appendix
System Trouble Displays
50410C