System Displays - Bosch 2212 User Manual

System Displays

Your security system communicates its status and provides instruction
to you through keypad displays. The following list presents all possible
displays along with an explanation for each. Your system might not use
all of them.
ALARM PT ##
[point text]
ALL ON
SYSTEM OK
ALL ON NO DELAY
SYSTEM OK
AUTOBYPASS PT ##
[point text]
BATTERY FAILED
TESTING ENDED
BATTERY TEST
PASSED
CALL FOR SERVICE
CANCELED PT ##
[point text]
CHECK DIAL TONE
CODE # IS NOW
DISABLED
CODE # IS NOW
ONE-TIME
CODE # IS NOW
OWNER TYPE
CODE # IS NOW
USER TYPE
CODE # ONE-TIME
36
Indicates a point in alarm, the second
line shows the point's name.
Indicates the entire system is turned
on and all points are normal.
Indicates the entire system is turned
on with no entry or exit delays.
Indicates a point has been
automatically bypassed. Call your
alarm company for service.
Indicates the battery test was
completed unsuccessfully and the test
session is ended.
Indicates the battery test was
completed successfully.
Call your alarm company. The
system requires service.
Indicates a cancelled alarm.
Check the phone line for a dial tone.
Indicates the passcode is disabled.
Indicates the passcode is currently a
One-Time passcode.
Indicates the passcode is currently an
Owner type passcode.
Indicates the passcode is currently a
User type passcode.
Indicates the passcode is an Owner
type.