Appendix; Supplementary Information For Adding Passcodes; User Authority Levels - Bosch D1260 Owner's Manual

Appendix

Supplementary Information for Adding Passcodes

Appendix
Supplementary Information for Adding Passcodes
Use the information contained in this Supplement to help you add user passcodes.

User Authority Levels

Your security company uses the information contained on this page to establish authority levels for system users. For
each of the 1- 14 authority levels, each command center function is either enabled (E), disabled (blank), or Passcode
enabled (P). A function that is enabled (E) is available to all users. A function that is passcode enabled (P) is only
available to users assigned an authority level that includes that function. If you do not want a particular command
included in a given authority level, leave it blank.
If you are having trouble understanding the concept of authority levels, try this simple exercise. Refer to the column titled
E/P on the next page. Notice that your security technician has marked some of the cells in this column with the letter "E",
others the letter "P", while others are left blank. An "E" indicates that this function is enabled for all authority levels. A
"P" indicates that the function is passcode protected. Look across the same row, and notice that some of the cells in the
authority level area have the letter "E". For each authority level in which an "E" appears, this function is enabled (with a
passcode required). A blank cell in the E/P column means that this function is unavailable for any authority level.
Under the heading Authority Level, you'll see columns 1-14, representing the fourteen authority levels. Now look at the
column labeled 1. Following down this column, you'll see that some cells are blank while some contain the letter "E",
which stands for enabled. Wherever there is an "E", it means that that function is available to users with an authority level
of 1.
D1260 Owner's Manual
© 2003 Bosch Security Systems 50410C