Part I: Security System Basics; Using The Command Center; Command Center Keys - Bosch D1260 Owner's Manual

Part I: Security System Basics

Using the Command Center

Your security system provides quick access to functions by pressing the COMMAND key and one or
two additional keys.
Another way to access functions is through the Command Menu.
To access the Command Menu, press the soft key adjacent to
Menu> shown in the display.
Pressing the <Previous or Next> soft key while in the Menu List
allows you to scroll up or down through the list of functions
programmed by your security company.
Pressing the soft key adjacent to the function being displayed
initiates the function.
To exit the Command Menu, press the <Exit soft key.
Use the Command Menu to locate functions you don't use often or that don't have a command number.

Command Center Keys

© 2003 Bosch Security Systems
Use the COMMAND key in combination with one or two
COMMAND
numeric keys to perform a function.
The ENTER key is used to complete the entry of your passcode at
ENTER
the command enter. Whenever a function requires that you enter
your passcode at the command center, first press the digits of the
code and then press the ENTER key. Your system will not
recognize your passcode until you press ENTER.
When Exit> or <Exit appears in the command center display,
EXIT
pressing the soft key adjacent to it will bring you one level up in
the function or will exit you out of the function you are in.
These functions may be displayed on either side of the display.
When viewing a list, pressing the <Previous soft key will take you
Previous
back to the previously shown item.
Press the Next> soft key to pass over the present item(s) in a
Next
menu or function.
D1260 Owner's Manual
Part I: Security System Basics
Using the Command Center
50410C