Advanced Commands Terms Used In This Section - Bosch D1260 Owner's Manual

Part III: Advanced Commands
Terms Used in This Section
Terms Used in This Section
Listed below are some of the terms you'll see throughout this section. Each term is covered in greater detail later in this
section and in Part II: System Commands.
Account
Area
Arm and Disarm
Authority Levels
Command Center
Command Center Scope
Panel
Relays
Skeds
User Passcodes
50410C
One or more areas reporting under a particular account number.
A group of detection devices connected to your security system.
To switch your burglar detection devices "on" and "off." When the burglar detection
device is armed and is tripped, an alarm may be set off. When the burglar detection
devices are disarmed, the security system will not detect intruders. Detection devices
programmed as 24-Hour or Fire points are always on.
Levels of access authority assigned to passcodes.
Arming station used to operate your security system.
Determines which areas a particular command center can access.
The main control unit, which is locked in a steel enclosure. It sends data to and receives
inputs from the command centers.
Optional dry contact outputs that respond to system events.
Functions programmed by your security company that occur at predetermined times.
A three to six digit number entered at a command center to access the system.
D1260 Owner's Manual
© 2003 Bosch Security Systems