Watch Mode ? (Command + 6) - Bosch D1260 Owner's Manual

WATCH MODE ? (COMMAND + 6)

Watch Mode
Description
With your security system disarmed, you can use watch mode to monitor some points. Each time some points are faulted
(door or window is opened) the command center chimes once and displays the point text for 60 seconds. No alarms are
generated by this mode except 24-hour alarms (fire, panic, etc.).
When the command center's keypad lighting is on, the command center does not chime. The keys light for 20 seconds
whenever you press a key.
Use this function in residential systems to monitor entries or exits in your home. In commercial systems it can serve as a
door chime to alert you when a customer or delivery person enters your business.
Note: Contact your security company to find out which points are watch points and whether or not your system
automatically turns the Watch Mode on whenever you disarm.
Entering Watch Mode:
1. Ensure your command center shows idle disarmed
text.
2. Press the COMMAND key.
3. The display shows *System Command*.
4. Press the 6 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the Menu> soft key to enter the Command Menu,
then press Next> soft key repeatedly
until you reach the WATCH MODE ?> prompt then press the
adjacent soft key.
5. The display briefly shows Watch Mode is now on
before returning to idle disarmed text
© 2003 Bosch Security Systems
Part II: System Commands
WATCH MODE ? (COMMAND + 6)
D1260 Owner's Manual
50410C