Your Custom Display - Bosch D1260 Owner's Manual

Your Custom Display

"At an idle state" means that the system is not currently performing a function entered by a user. There are three idle
states the system may be in:
•
Turned on (Armed)
•
Turned off (Disarmed) with no points faulted (doors or windows open) in the area
•
Turned off with faulted points (doors or windows open) in the area.
This manual uses the default idle state displays for examples of these idle states. Your security company may have
programmed custom text for the idle displays in your system. The custom text and the default text for the three system
idle displays follow.
Area Name Text
Note: Throughout this manual, all examples of "AREA # NAME TEXT" will use "AREA 1
WAREHOUSE." The actual name of Area 1 will differ depending on the specifics of your
system.
Area Is On Text
Area Off Text
Area Not Ready Text
© 2003 Bosch Security Systems
Default Text
Appears on the top line of the display
Indicates the area is turned on (armed) and ready to detect intruders.
Note: The Silence> soft key is only shown when the keypad buzzer is
active
Indicates the area is turned off (disarmed). 24-hour points remain armed.
Indicates that the area is turned off, but not ready to arm.
D1260 Owner's Manual
Part I: Security System Basics
Your Custom Display
Custom Text
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
50410C