Volume; Contrast; Backlight; System Events - Bosch Solution 64 User Manual

Devices > Keypads >

Volume

This menu allows you to adjust the volume of the keypad's
buzzer. Each keypad will need to have their volume adjusted
separately.
1. Press [MENU] + [6] + [1] + [0].
The keypad will display:
Keypad 001 Volume
L
Press
2. Use the [ ] and [ ] keys or use the [ ] and [ ] keys to
increase or decrease the volume of the keypad buzzer until
the desired volume has been reached.
3. Press [OK] to save and exit, or press [MENU] to exit without
saving.
Devices > Keypads >

Contrast

This menu allows you to adjust the contrast of the keypad's LCD
display. Each keypad can have their display adjusted separately.
1. Press [MENU] + [6] + [1] + [1].
The keypad will display the contrast screen.
Keypad 001 Contrast
L
Press
2. Use the [ ] and [ ] keys to adjust the bar until the desired
contrast is reached.
3. Press [OK] to save and exit, or press [MENU] to exit without
saving.
Devices > Keypads >

Backlight

This menu allows you to adjust the brightness of the keypad's
LCD display backlight. Each keypad can have their display
adjusted separately.
1. Press [MENU] + [6] + [1] + [2].
The keypad will display the backlight screen.
Keypad 001 Backlight
L
Press
2. Use the [ ] and [ ] keys to adjust the bar until the desired
backlight is reached.
3. Press [OK] to save and exit, or press [MENU] to exit without
saving.
Bosch Security Systems | 12/05 | BLCC110U
MENU 6-1-0
H
OK to SAVE
MENU 6-1-1
H
OK to SAVE
MENU 6-1-2
H
OK to SAVE

System Events

Options in this section relate to programming of system wide
options and interpretation of system trouble events when and
if they occur. Some events such as open zones will appear and
single events while other may be grouped together. In this case
you need to drill down to see the specific detail for each event.
Your installer will advise you how to interrogate system trouble
events.
System > Commands >

Panel Status

The panel staus menu displays the panel software version
information as well as highlighting any system troubles that
are currently in effect. This is a view only location.
System > Commands >

System Trouble

The System Trouble Menu displays all current system troubles in
a list format. Some trouble events require you to drill down and
non-system trouble that are curent within the Solution control
panel.
1. Press [MENU] + [7] + [0] + [1].
The keypad will display a list of all current system and non
system trouble conditions.
To determine the system trouble condition, highlight the
panel number (P001 to P002) that you want to view using
the [ ] and [ ] keys, then press [OK] to select.
P001 System Trouble
Z001 Zone 1 Name
Z002 Zone 2 Name
Press
To determine the non system (zone) trouble condition,
highlight the zone number Z001 to Z064) that you want to
view using the [ ] and [ ] keys, then press [OK] to select.
P001 System Trouble
Z001 Zone 1 Name
Z002 Zone 2 Name
Press
2. If viewing system trouble conditions, the keypad will display
similar to the following:
Panel 001 P001
Voltage= 13.9V Temp=36
Date And Time
Press OK or MENU
The third line of the keypad display scrolls between all
current system trouble events.
Solution 64 | User Guide
MENU 7-0-0
MENU 7-0-1
OK or MENU
OK or MENU
23