Standby Mode; Answerphone; Turning On The Answerphone - Geemarc SCREENPHONE User Manual

USING THE TELEPHONE

Standby Mode

When the telephone is idle, the display may show the following type of
information:
01 New Message
02 New Calls
This informs you that there is one new answerphone message and details
of two unanswered calls. This information is held in the call log.
See Answerphone chapter about accessing Answerphone messages.
See Caller Display chapter about accessing call log records of
unanswered calls
35

ANSWERPHONE

If you are not available to answer a telephone call, the telephone can
receive and save a typed message from the caller (via the Typetalk
operator), provided they have used the 18002 prefix. The answer phone
will be activated if a call is not answered after 2 rings.
When someone leaves a message on your Answer phone, the new
message indicator will light up
and the New Message count seen in standby mode will increase by one.
01 New Message
02 New Calls
Turning the Answerphone On
Press the Answer Phone key. When switched on, "Ans On" will appear
in the comment area of the screen.
To turn the answer phone off, press the answer phone key once again.
The "Ans On" text will no longer be displayed on screen.
36