Geemarc SCREENPHONE User Manual page 15

USING THE TELEPHONE
The Typetalk operator has established
connection with Caller X.You will receive
the following messages in the main area:
Note: GA = Go Ahead
SCREENPHONE User can type text to the
A
Operator once you have received GA
The Operator will relay the text to speech
for Caller X.
SCREENPHONE User awaits response.
B
This will appear in the form of a typed
message on the screen
Repeat steps A, B, each time you wish to
communicate
At the end of the conversation, the
Operator sends the following message to
you:
SK = Stop Keying
You can now end the call by replacing the
handset
Call Connected.
GA
SK
27
USING THE TELEPHONE
Receiving a Text Only Call
ACTIONS
Caller X dials the SCREENPHONE User
telephone number. This number must be
prefixed with 18002.
The telephone number must include full
area code
The 18002 prefix calls the Typetalk
operator
The SCREENPHONE telephone rings
The SCREENPHONE User picks up
handset
Press V/T Mode key to enter TEXT mode
SCREENPHONE user receives the
following
messages in the main area:
SCREENPHONE User can type text to the
A
Operator
Once you have typed GA the Operator
will translate the text to speech for Caller X
SCREENPHONE User awaits response.
B
This will appear in the form of a typed
message on the screen
Follow steps A, B, each time you wish to
28
ON SCREEN DISPLAY
TXD Connecting
Typetalk
TXD Operator
Connected, please
wait
TXD Call
Connected GA