De-Register A Handset; Set The Flash Time; Set The Dial Mode; Set The Key Tone - Geemarc COMBI DECT 295 Photo User Manual

8.2.5

De-register a Handset

You w ill need to enter the 4-digit system PIN code in order to de-register a handset
from the base station. (The default PIN is 0000.)
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press MENU/OK and a list of registered handsets is displayed.
6. Press / to select one of the handsets that you w ant to de-register.
7. Press MENU/OK to confirm.
8.2.6 Set the Flash Tim e
The default flash time is best suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
MEDIUM=300ms, LONG=600ms).
4. Press MENU/OK to confirm.
8.2.7

Set the Dial Mode

The default dial mode is best suitable for your country and netw ork operator. It is
unlikely that you should need to change this setting unless advised to do so.
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
4. Press MENU/OK to confirm.
8.2.8

Set the Key Tone

The key tone is a confirmation beep w hen you press any key. It is set on by default,
but can be turned off, if desired.
1. Press MENU/OK and /
2. Press MENU/OK and /
3. Press MENU/OK and /
4. Press MENU/OK to confirm.
to select SETTINGS.
to select DELETE HS.
to select SETTINGS.
to select FLASH TIME.
to select the desired flash time (SHORT=100ms,
to select SETTINGS.
to select DIAL MODE.
to select the desired dial mode (TONE or PULSE).
to select SETTINGS.
to select KEY TONE.
to select ON or OFF.
32