Wall Mounting; Desktop - Geemarc SCREENPHONE User Manual

INSTALLATION
Insert the mains adaptor into the socket located at the rear of the
telephone
DC 9V
then plug the other end of the cable into a 13 amp wall socket.
Please choose a socket which is easily accessible and near to your
telephone socket. This means you can unplug the mains power quickly in
case of a problem.
NOTE:
Fit 4 x AA sized batteries in order to save and use stored numbers in case
of power failure. The telephone will retain all functions when operating
solely under battery power except:
The LCD backlight will be disabled
The flash strobe will be disabled
Without mains and batteries the telephone will not operate.
It is advisable to use mains power with the batteries inserted as a
means of backup in case of power failure.
13
INSTALLATION

Wall Mounting

Make 2 holes in the wall, 80mm apart (use the wall mount template, on
page 70, as a guide). Insert the wall plugs and the wall mounting screws.
The screws should protrude from the wall by 6-7mm.
Place the telephone onto the screw-heads and slide down to secure.
Handset clip
To ensure that the handset stays firmly in position when the telephone is
mounted, slide out the clip, turn it around and slide it back into the wall
mounting position.

Desktop

The telephone has rubber pads on the base; therefore the telephone can
be placed directly onto a desktop or work surface.
14