Geemarc SCREENPHONE User Manual page 12

USING THE TELEPHONE
ACTIONS
Pre-dial the number, with the handset in the
cradle.
You must use the prefix 18001 if you
require the Typetalk operator. This can be
entered using one of the following methods:
manually using the keypad
pressing the "18001" button on the
telephone base.
Pulling a number from the phonebook
with 18001 already added.
The telephone number must include full
area code.
Lift the handset
The telephone automatically switches to
Text mode as 18001 has been dialled.
You will receive the following messages in
the main area:
If someone answers and the Typetalk
operator has established connection with
Caller X.You will receive the following
messages in the main area:
Note: GA = Go Ahead
Press V/T key once you have received GA
A
on screen
ON SCREEN DISPLAY
TXD Ringing
TXD Ringing
TXD Connecting
Typetalk Operator
TXD operator
Connected, please
wait
Call Connected.
GA
21
USING THE TELEPHONE
Telephone is now in Voice mode.
B
You can speak directly to Caller X using the
handset. At the end of the piece of
conversation say GA, this tells the Typetalk
operator that you have finished and that it
is Caller X's turn to reply
Press V/T Mode key to return to TEXT in
C
order to receive a reply from Caller
Repeat steps A, B, C each time you wish to
speak
At the end of the conversation, the
Operator sends the following message to
you:
SK = Stop Keying
You can now end the call by replacing the
handset
Note: If you make an incorrect entry while pre-dialling the telephone
C
number, press to clear the last digit and then enter the correct number
SK
22