Epson Stylus CX3100 Service Manual page 19

EPSON Stylus CX3100/3200
(The upper line shows "Error indication" and the
Error Status
Paper out → Load paper in Paper tray and press the
Paper out
Color copy button.
Paper jam or miss feed → Press the Color copy
Paper jam
button and clear the paper jam by hand if necessary.
• No black ink cartridge → Press the Color copy
Ink cartridge out / Ink end (black)
• Black ink out → Press the Color copy button to
• No
Ink cartridge out / Ink end (color)
• Color ink out → Press the Color copy button to
Printer error → See your documentation and call
Waste ink overflow
service if necessary.
Printer error → See your documentation and call
Fatal error
service if necessary.
Scanner error → See your documentation and call
service if necessary.
Scanner unit open → Close the scanner unit.
Scanner unit open
Troubleshooting
LCD Indication
lower line shows descriptive character strings by
scrolling.)
button to install new ink cartridge.
begin replacing the ink cartridge.
olor ink cartridge → Press the Color copy
C
button to install new ink cartridge.
begin replacing the ink cartridge.
Troubleshooting at Unit Level
Table 3-1. LCD Indication
LED Indication
Power Error LED
- Lighting up
- Lighting up
- Lighting up
- Lighting up
- Blinking
- Lighting up
- Lighting up
Blinking Lighting up
Restoration Method
Supply paper and press the Color or B&W copy button.
Remove the jammed paper and press the Color or B&W copy
button.
Move the carriage to the position for replacement by means of
the Color or B&W copy button and replace the black ink
cartridge with a new one.
After replacement, close the scanner unit, and the carriage will
move the printing start position and start printing.
Move the carriage to the position for replacement by means of
the Color or B&W copy button and replace the color ink
cartridge with a new one.
After replacement, close the scanner unit, and the carriage will
move the printing start position and start printing.
Reset the waste ink counter after replacing the waste ink porous
pad.
Turn the power off once and turn it on again. If this turning the
power off and on does not work to recover the printer, make
repairs.
Turn the power off once and turn it on again. If this turning the
power off and on does not work to cover the scanner, make
repairs. (Refer to "Troubleshooting for Scanner"
Close the scanner unit.
Revision A
(p.30).
19