Epson Stylus CX3100 Service Manual page 64

EPSON Stylus CX3100/3200
1. Click the item for which the adjustment is to be made and click the [OK] button.
When you select "Printing the Bi-D adjustment pattern", you can print the pattern.
When "Checking present Bi-D parameter" is selected, the set value is indicated at
the lower center of the screen. When you select "Input Bi-Directional adjustment
value", you can input the adjusted values.
2. From the printed Bi-D adjustment pattern, judge which vertical line corresponding
to which compensation value for each mode is straight.
Figure 5-7. Bi-D Adjustment Pattern
3. If adjustment is necessary, select [Bi-D Adjustment] and input the compensation
values at the relevant points in each mode. Adjusted values can be input for each
mode.
Adjustment
4. Check the item for which the adjustment is to be made. The input value is
indicated in [Adjusted items] at the right side of the screen.
5. By repeating steps 1 to 4 above, make adjustment to minimize the deviation of
bidirectional printing timing.
Adjustment by Adjustment Program
Figure 5-8. Input Bi-Directional Adjustment Value
Revision A
64