System Health Monitor Functions - DFI-ITOX G4C600-R User Manual

1
Introduction
• 1 4-channel audio output connector
• 1 S/PDIF-in/out connector
• 1 connector for IrDA interface
• 2 RAID IDE connectors (G4C600-R only)
• 2 Serial ATA connectors
• 2 IDE connectors
• 1 floppy drive connector
• 2 ATX power supply connectors
• 1 Wake-On-LAN connector
• CPU fan, chassis fan and second fan connectors

1.1.2 System Health Monitor Functions

The system board is capable of monitoring the following "system
health" conditions.
• Monitors CPU/system temperature and overheat alarm
• Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and
failure alarm
• Monitors the fan speed of the CPU fan, chassis fan and second
fan; and failure alarm
• Automatic chassis fan and second fan on/off control
• Read back capability that displays temperature, voltage and fan
speed
Refer to the "PC Health Status" section in chapter 3 and the
"Hardware Monitor" section in chapter 4 for more information.
1.1.3 Intelligence
Automatic Chassis/Second Fan Off
The chassis fan and second fan will automatically turn off once
the system enters the Suspend mode.
Dual Function Power Button
Depending on the setting in the "Soft-Off By PWR-BTTN" field of
the Power Management Setup, this switch will allow the system to
enter the Soft-Off or Suspend mode.
12