DFI-ITOX G4C600-R User Manual page 113

4.2.5 HighPoint RAID Drivers (G4C600-R only)
If the hard drives connected to the RAID IDE connectors will be
configured as RAID, you must install the Highpoint RAID drivers.
1. On the left side of the autorun screen, click the "TOOLS"
icon.
2. Click "HighPoint RAID Drivers" on the main menu. A
"readme" screen which contains the RAID drivers installation
instructions will appear.
The installation procedure will lead you to install the driver
from a diskette. The diskette is included in the system board
package.
To install the RAID drivers:
1. Insert the "HighPoint 372 N RAID Drivers" diskette.
2. Follow the installation instructions shown on the screen.
3. Reboot the system for the driver to take effect.
Note:
Refer to the HighPoint RAID User's Manual for more informa-
tion about the RAID drivers. The manual is included in the CD.
Supported Software
4
113