System Health Monitor Functions - DFI-ITOX G4S300-B User Manual

1
Introduction
• 1 DB-15 VGA port
• 1 DB-25 parallel port
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 3 audio jacks: line-out, line-in and mic-in
I/O Connectors
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 connector for 1 external serial port
• 1 connector for 1 external game/MIDI port
• 1 front audio connector for external line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF-in/out connector
• 1 connector for IrDA interface
• 2 Serial ATA connectors
• 2 IDE connectors
• 1 floppy drive interface supports up to two 2.88MB floppy
drives
• 2 ATX power supply connectors
• 1 Wake-On-LAN connector
• CPU fan, chassis fan and second fan connectors

1.1.2 System Health Monitor Functions

The system board is capable of monitoring the following "system
health" conditions.
• Monitors CPU/system temperature and overheat alarm
• Monitors CPU/1.5V/3.3V/5V/±12V/5VSB/VBAT voltages
• Monitors the CPU fan speed and failure alarm
• Read back capability that displays temperature, voltage and fan
speed
Refer to the "PC Health Status" section in chapter 3 and the
"Hardware Monitor" section in chapter 4 for more information.
12