DFI-ITOX G4C600-R User Manual page 81

Parallel Port Mode
The options are SPP, EPP, ECP and ECP+EPP. These apply to a
standard specification and will depend on the type and speed of
your device. Refer to your peripheral's manual for the best option.
SPP
Allows normal speed operation but in one direction only.
"ECP (Extended Capabilities Port)"
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal mode's data transfer rate.
"EPP (Enhanced Parallel Port)"
Allows bidirectional parallel port operation at maximum speed.
If you selected EPP, the "EPP Mode Select" field is selectable. If you
selected ECP, the "ECP Mode Use DMA" field is selectable. If you
selected ECP+EPP, both "EPP Mode Select" and "ECP Mode Use
DMA" are selectable.
EPP Mode Select
This field is used to select the EPP mode of the parallel port.
ECP Mode Use DMA
This is used to select a DMA channel of the parallel port.
Game Port Address
This field is used to select the game port's address.
Midi Port Address
This field is used to select the midi port's address. If you have
selected the midi port's address, you may select its IRQ in the "Midi
Port IRQ" field.
3
BIOS Setup
81