DFI-ITOX G4C600-R User Manual page 82

3
BIOS Setup
Midi Port IRQ
This field is used to select the midi port's IRQ.
3.1.4.4 Onboard LAN Boot ROM
Enable this field if you wish to use the boot ROM (instead of a
disk drive) to boot-up the system and access the local area net-
work directly.
If you wish to change the boot ROM's settings, type the <Shift>
and <F10> keys simultaneously when prompted during boot-up.
Take note: you will be able to access the boot ROM's program
(by typing <Shift> + <F10>) only when this field is enabled.
3.1.4.5 RAID Device Control (G4C600-R only)
This field is used to enable or disable the
RAID controller.
3.1.4.6 Init Display First
This field is used to select whether to initialize the AGP or PCI
first when the system boots.
AGP
PCI Slot
82
When the system boots, it will first initialize the
AGP.
When the system boots, it will first initialize PCI.
onboard HighPoint