DFI-ITOX G4C600-R User Manual page 87

3.1.5.17 Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
Disabled
Password
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the right
Keyboard 98 When this option is selected, press the "wake up"
3.1.5.18 KB Power On Password
Move the cursor to this field and press <Enter>. Enter your
password. You can enter up to 5 characters. Type in exactly the same
password to confirm, then press <Enter>.
The power button will not function once a keyboard password has
been set in this field. You must type the correct password to power-
on the system. If you forgot the password, power-off the system and
remove the battery. Wait for a few seconds and install it back
before powering-on the system.
3.1.5.19 KB Power On Hot Key
This field is used to select a function key that you would like to use
to power-on the system.
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password you
would like to use to power-on the system in the
"KB Power On Password" field.
When this option is selected, select the function key
you would like to use to power-on the system in
the "KB Power On Hot Key" field.
When this option is selected, double-click the left
button of the mouse to power-on the system.
button of the mouse to power-on the system.
key of the Windows
power-on the system.
BIOS Setup

98 compatible keyboard to
3
87