DFI-ITOX G4C600-R User Manual page 89

3.1.6.2 Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto The system will automatically detect the settings for you.
Manual Choose the specific IRQ in the "IRQ Resources" field
respectively.
3.1.6.3 IRQ Resources
Move the cursor to this field and press <Enter>. This field is used to
set each system interrupt to either Reserved or PCI Device.
3.1.6.4 PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards can
work with PCI/VGA or not. The default value is Disabled.
Enabled MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled MPEG ISA/VESA VGA cards does not work with PCI/
VGA.
3.1.6.5 PCI IRQ Assignment
By default, an IRQ is automatically assigned to the PCI devices that
are installed in the PCI slots.
If a PCI device has not been assigned an IRQ, you must manually
assign an IRQ for the device. During system boot-up, you will see
"NA" for the device that does not have an IRQ assigned.
3
BIOS Setup
89