DFI-ITOX G4C600-R User Manual page 88

3
BIOS Setup
3.1.5.20 PWR Lost Resume State
Keep Off
Turn On
Last State When power returns after an AC power failure, the
3.1.6 PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be identical
to this one.
3.1.6.1 Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.
88
When power returns after an AC power failure, the
system's power is off. You must press the Power
button to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
system will return to the state where you left off
before power failure occurs. If the system's power is
off when AC power failure occurs, it will remain off
when power returns. If the system's power is on
when AC power failure occurs, the system will power-
on when power returns.
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.