Placing External Calls; Redialing A Number - Mitel 5320 User Manual

Placing External Calls

The following sections describe features used when placing external calls.
To place an external call:
1. Press the Outgoing button, an unlit Call Key button, or enter the Outgoing Call access
2. Dial the number.
Depending on system configuration, you may also be able to use one of the following methods
to select an outgoing line:
•
•
Contact your system administrator for more information about using Select Line Group or ARS
access codes.

Redialing a Number

You can quickly redial the last external number dialed. You cannot redial extension numbers.
To use Redial:
Mitel ® 5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
code (8 is the default code).
If you cannot place an external call because all outgoing lines are busy, you
can request a callback, which prompts the system to contact you when a
line becomes available. See "Requesting a Callback (Queuing the Phone)"
on page 36.
NOTES
If you are prompted for an account code (indicated by a single beep), you
must enter an account code before you can place your call. See "Using
Account Codes" on
Enter the Select Line Group feature code. The default codes are 92001 to 92208.
Enter the Automatic Route Selection (ARS) feature code. The default code is 92000.
With or without the handset lifted, press
a line and dials the number.
Answering and Placing Calls
page 42.
(Redial). The system automatically selects
Page 37