Undoing Actions; Resetting Activated Features - Aastra 415 User Manual

Using the display and operating elements

Undoing actions

To cancel operating steps, proceed as follows:
Activate/deactivate function
You can enable or disable a function or a menu entry by selecting the entry you want
and pressing the Select
Select

Resetting activated features

You can deactivate again all the activated functions (e.g. Forwarding).
Reset
26
Exit editor without changes:
Press the End key.
Scrolling back through the menu step by step:
Press the Correction key.
Back to the idle state in the menu:
Press the End key.
softkey.
Activate/deactivate function:
Press the Select softkey.
Press the navigation key up.
➔
Activated features is opened.
Or:
Activated features are also available via the menu:
Press the Reset softkey to deactivate the function you want.
➔
The function is now deactivated.
Menu > Activated features.
eud-1292/1.1 – R1.0 – 09.2011